In Part 1 of my Eastern Beaver 3CS install I showed you how I pulled the wires up to the controls. Here in Part 2 I show you how I soldered all the connections, ran the fuse boxes under the seat as well as tidying...
Here's how I ran my Eastern Beaver 3 Circuit Solution from the battery to the controls. It took a few different tries before I figured out the best way on my WR250R. I hope this helps others out there...
In this little video I show you how I installed new ProTaper EVO bars, Highway Dirtbikes custom top & bottom clamps, grip heaters and grips on my WR250R. Hope you enjoy! http://vimeo.com/9038421 My upcoming video shows how I installed the Eastern Beaver 3 Circuit Solution. Install Video -...
Its no fun being sick and having new parts sitting in the garage waiting to be installed. Even worse when its new parts to the market, like this 12oclocklabs taillight integration using a DRC Edge taillight. The programming is just awesome on this light, with...
When you get a fender bag you are sure to see on the instructions to cut notches in your fender to secure the bag to the fender. I did some asking around and many riders said that approach worked while other said their bags fell...
I saw this mod over on WRR Dual Sport forums by BPG and thought wow.. that pretty cool. After seeing a few more riders do this mod and with good reports back, I decided to go for it to. What the heck it was only...
One of the first things I did was remove the side stand kill switch. Simply remove it from the side stand. Then I cut the wires running to the socket and soldered them together, heat shrink them and electrical taped for good measure, like so: So far...
Ordered my 3 Circuit Solution with matching grounding kit from Eastern Beaver as well as a few goodies from Highway Dirtbikes. This kit will run from the battery and give you three different circuits for accessories. I plan to use it for grip heaters, one...